Smarty s-06

CaTCHER software's inside

Ten different performance levels.

Fastest download in the industry, up to three times faster than
the competition, a typical ECM update takes about 3.5 to 5
minutes, depending on the truck model.

ABS tire height updates in just few seconds.

Not traceable in the stock setting. Smarty leaves no footprint.

Manual High Idle is enabled in all softwares

Reads Diagnostic Trouble Codes in plain text.

No tools required, no fuses to pull.

USB built in for simple updates .

Most complete keyboard in the industry.

Reliable, it works off your OEM hardware.

Programmable Speed Limiter from 25 to 250 mph

The horsepower settings. except #0, all other softwares have a

modified "Torque management" ( TQM ). The throttle response

is greatly improved but is set to a save limit. With "Save" I mean

save for your tranny and rest of the driveline.

SW # 0 : Half power
SW # 1 : 30 Hp increase, with added timing .
SW # 2 : 60 Hp increase, no added timing.
SW # 3 : 60 Hp increase, with added timing.
SW # 4 : 90 Hp increase, no added timing.
SW # 5 : 90 Hp increase, with added timing.
SW # 6 : 130 Hp increase, no added timing.
SW # 7 : 130 Hp increase, with added timing.
SW # 8 : 170 Hp increase, no added timing.
SW # 9 : 170 Hp increase, with added timing.

Tested on stock trucks on a

Mustang Dyno

Stock means just that. Stock! Even the air filters were stock...

The trucks were S T O C K, even the wastegate settings!

We checked the "baseline" ( the stock truck Hp at the rear

wheels ) twice in a day in order to be sure about our findings.

The above declared HP numbers are all rounded down to the

closest number. For example the 90 Hp file actually did 96 Hp.

That's a 90 Hp software for me, not a 100. The 170 Hp was 174.

No trace is left in the ECM!

I herby

CLAIM

that SmartyCR is the

FIRST AND ONLY

downloader that does not erase any of the stored data in the

ECM. Smarty does NOT leave any electronic footprints in the

ECM or any other electronic module in the truck. Smarty does

NOT set ANY codes once the ECM is set back to stock. Smarty

does NOT need to have fuses pulled.

No matter what the competition claims , in one way or another

they're ALL detectable.

Smarty is NOT!

Yet, Smarty can not do one thing for you. Fix what others have

broken. Smarty can not restore a key on counter that another

downloader has erased . Smarty can not fix VIN# troubles

caused by other products. If your Check engine / ABS light is on

because another product has screwed your ECM, Smarty can

not fix it, the other guy HAS to...

ABS / Speedo recalibration

The tire height can be adjusted up to 44" in increments of 10

tenth of an inch in just a couple seconds. Of course, Smarty

needs to be VIN# locked to the truck in order to get into the ABS

adjustment section.

DTC Code reader

The name says it all.

You can read and erase codes. Codes are displayed also in

plain English. That's old news by now.

Smarty S-03

was the

first

one to provide that utility, others found the idea to be a

good

one too.

( Smarty does erase ABS codes too but does not display them )

ECM update speed

Faster than anything else on the market! Again we've done our

homework on the protocol.

Less than

5 minutes. Three times

faster

than a Star-Scan

diagnostic tool

or competitor.

have developed our own bootloader in order

to not have to

pull fuses should an update become interrupted

for any reason.

All you have to do is to turn the key off / key on

Smarty does

everything else on it's own.

Updates

The CaTCHER softwares as they are today are only a

starting

point

. Expect major news

in future.

We’re for your feedback,

opinions, likes, dislikes...

We will make Smarty do what YOU want, TOGETHER

Categories

Smarty s-06